bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Keystone Copper Canyon Fifth Wheel


  • Recommendation to Upgrade to Dual Motor Landing Gear System on Trailer
  • In order to upgrade your existing landing gear system to a dual motor setup, I recommend completely replacing the follower leg with a lead leg # LG-177202. I have attached the dimensions for this lead leg so you can compare them to your existing unit to make sure it will work well as a replacement. It's technically possible to upgrade the follower leg by replacing all of its inner components, but this is extremely involved and it is much safer to simply replace the leg itself. On a dual...
    view full answer...

  • Recommended License Plate Mounting Bracket to Mount to 2011 Keystone Cougar Trailer
  • You can mount the Cruiser License Plate Mounting Plate # CR79150 referenced in your question directly to the outer wall of your Keystone Cougar. The included screws will allow you to mount the license plate to the bracket, and to attach the bracket to the trailer, you will likely just need some self-tapping screws like # CR80430. I have attached a short video demonstration on this product that you can also check out.
    view full answer...

  • Snow Chain Recommendation for Tire Size ST235/80-16
  • For your tire size of ST235/80R16 we have the Titan chains part # TC2319 which are a confirmed fit and would work well. I like these chains because they are easy to install and provide great traction. I attached an install video for these chains for you to check out as well. Be sure to check the owners manual of your trailer to determine if there are any tire chain restrictions.
    view full answer...

  • Which Size Brakes Assemblies Does A 2011 Keystone Copper Canyon 273FWRET Use?
  • Since your 2011 Keystone Copper Canyon 273FWRET Fifth Wheel has a GVWR of 10240lbs it should have at least two 5200lb axle which do use 12" brakes. I recommend removing one of the hub and drum assemblies and measuring your brake assemblies and the inside dimensions of your drums as shown in the included diagram to confirm that you do currently have 10" brakes. If you would like to replace your current hub and drum assemblies and braking assemblies to the 12" version I will need to know...
    view full answer...

  • Self Adjusting Brake Assembly Recommendations for 2010 Keystone Cougar 276RLS
  • The part # K23-478-479 is exactly what you are looking for. It is the left and right self adjusting brake assemblies that are the correct fit for the Dexter D44 4,400 lb axles you have on your 2010 Keystone Cougar 276RLS.
    view full answer...